uh… a lot

.Xresources

@@ -1,13 +1,14 @@
 #if __has_include(".extend.Xresources")
 #include ".extend.Xresources"
 #endif
+!#include ".xsolarized"
 
 ! ^ The above lines are no comments!
 ! Leave them as they are if a file ~/.extend.Xresources is being used on your system.
 ! config can be added there or also here below.
 ! For comments use "!"
 
-Xft.dpi: 91
+Xft.dpi: 109
 Xft.antialias: true
 Xft.hinting: true
 Xft.rgba: rgb
@@ -20,6 +21,7 @@ XTerm*foreground: #e7e7e7
 XTerm*pointerColor: #16A085
 XTerm*faceName: Hack
 XTerm*faceSize: 11
+URxvt.intensityStyles: false
 
 
 ! ROFI COLORS

.config/compton.conf

@@ -24,7 +24,7 @@ backend = "xrender";
 mark-wmwin-focused = true;
 mark-ovredir-focused = true;
 detect-client-opacity = true;
-unredir-if-possible = true;
+unredir-if-possible = false;
 refresh-rate = 0;
 vsync = "opengl";
 dbe = false;

.config/mpv/input.conf

@@ -13,8 +13,8 @@ RIGHT osd-bar seek 5 relative+exact
 # This displays statistics of the currently played file
 i show_text "${osd-ass-cc/0}{\\fs11}{\\fnSource Sans Pro}{\\bord1}{\\3c&H262626&}{\\alpha&H11}\\N{\\b1}File:{\\b0}\\h\\h${osd-ass-cc/1}${filename}${osd-ass-cc/0}\\N\\h\\h\\h\\h\\h{\\b1}${?media-title:Title:\\h\\h}{\\b0}${osd-ass-cc/1}${?media-title:${media-title}}${osd-ass-cc/0}${?chapter:\\N\\h\\h\\h\\h\\h}{\\b1}${?chapter:Chapter:\\h\\h}{\\b0}${osd-ass-cc/1}${?chapter:${chapter}}${osd-ass-cc/0}${?cache-used:\\N\\h\\h\\h\\h\\h}{\\b1}${?cache-used:Cache:\\h\\h}{\\b0}${?cache-used:${cache-used}\\h\\h+${demuxer-cache-duration} sec}\\N\\N{\\b1}Video:{\\b0}\\h\\h${video-codec}\\N\\h\\h\\h\\h\\h{\\b1}A-V:{\\b0}\\h\\h${avsync}\\N\\h\\h\\h\\h\\h{\\b1}Dropped:{\\b0}\\h\\h${drop-frame-count}\\h\\h\\h\\h\\h{\\b1}VO:{\\b0}\\h\\h${vo-drop-frame-count}\\N\\h\\h\\h\\h\\h{\\b1}FPS:{\\b0}\\h\\h${fps} (specified)\\h\\h${estimated-vf-fps} (estimated)\\N\\h\\h\\h\\h\\h{\\b1}Native Resolution:{\\b0}\\h\\h${video-params/w} x ${video-params/h}\\N\\h\\h\\h\\h\\h{\\b1}Window Scale:{\\b0}\\h\\h${window-scale}\\N\\h\\h\\h\\h\\h{\\b1}Aspect Ratio:{\\b0}\\h\\h${video-params/aspect}\\N\\h\\h\\h\\h\\h{\\b1}Pixel format:{\\b0}\\h\\h${video-params/pixelformat}\\N\\h\\h\\h\\h\\h{\\b1}Colormatrix:{\\b0}\\h\\h${video-params/colormatrix}\\N\\h\\h\\h\\h\\h{\\b1}Primaries:{\\b0}\\h\\h${video-params/primaries}\\N\\h\\h\\h\\h\\h{\\b1}Levels:{\\b0}\\h\\h${video-params/colorlevels}${?packet-video-bitrate:${!=packet-video-bitrate==0:\\N\\h\\h\\h\\h\\h}}{\\b1}${?packet-video-bitrate:${!=packet-video-bitrate==0:Bitrate:\\h\\h}}{\\b0}${?packet-video-bitrate:${!=packet-video-bitrate==0:${packet-video-bitrate} kbps}}\\N\\N{\\b1}Audio:{\\b0}\\h\\h${audio-codec}\\N\\h\\h\\h\\h\\h{\\b1}Sample Rate:{\\b0}\\h\\h${audio-params/samplerate}\\N\\h\\h\\h\\h\\h{\\b1}Channels:{\\b0}\\h\\h${audio-params/channel-count}${?packet-audio-bitrate:${!=packet-audio-bitrate==0:\\N\\h\\h\\h\\h\\h}}{\\b1}${?packet-audio-bitrate:${!=packet-audio-bitrate==0:Bitrate:\\h\\h}}{\\b0}${?packet-audio-bitrate:${!=packet-audio-bitrate==0:${packet-audio-bitrate} kbps}}" 8000
 
-h add sub-delay -0.041708333333
+#h add sub-delay -0.041708333333
-l add sub-delay 0.041708333333
+#l add sub-delay 0.041708333333
 j add sub-pos 1
 k add sub-pos -1
 

.config/mpv/mpv.conf

@@ -1,16 +1,14 @@
 #Allgemein
-#opengl-backend=win
-#vo=opengl
 vo=gpu
 #gpu-context=open-gl
 gpu-api=vulkan
-#profile=opengl-hq
 profile=gpu-hq
 #hwdec=auto-copy
 spirv-compiler=shaderc
 
 #force-window=yes
 osd-playing-msg=playing: ${media-title} ${!window-scale==1.000:(scale: ${window-scale})}
+no-audio-display
 #player-operation-mode=pseudo-gui
 
 
@@ -57,7 +55,7 @@ blend-subtitles=yes
 #interpolation-threshold=0.01
 video-sync=display-resample
 #interpolation=yes
-#tscale=linear
+tscale=sphinx
 
 #Deinterlace
 #vf-defaults=yadif
@@ -74,7 +72,7 @@ interpolation=no
 #fbo-format=rgba32f   # for fsrcnn
 #glsl-shader="/home/kageru/.config/mpv/fsrcnn/FSRCNN_24_4_2.glsl"
 vf=vapoursynth=~/.config/mpv/scripts/dvd.vpy
-glsl-shader="~/.config/mpv/shaders/ravu-r2.hook"
+glsl-shader="~/.config/mpv/shaders/fsrcnnx3x.glsl"
 glsl-shader="/home/kageru/.config/mpv/shaders/grain2.glsl"
 deband=yes
 deband-iterations=1
@@ -89,7 +87,7 @@ player-operation-mode=cplayer
 osd-playing-msg=
 
 [sr]
-glsl-shader="~/.config/mpv/shaders/ravu-r2.hook"
+glsl-shader="~/.config/mpv/shaders/fsrcnnx16.glsl"
 
 [db]
 deband=yes

.config/polybar/config

@@ -8,8 +8,8 @@
 ;=====================================================
 
 [colors]
-background = #80303031
+background = #00303031
-background-alt = #303031
+background-alt = #00303031
 foreground = #fafbfb
 foreground-alt = #dddddd
 primary = #fafbfb
@@ -23,12 +23,12 @@ override-redirect = true
 wm-restack = i3
 
 [bar/right]
-monitor = ${env:MONITOR:HDMI-1}
+monitor = ${env:MONITOR:HDMI-0}
 width = 100%
-height = 48
+height = 32
 ;offset-x = 1%
 ;offset-y = 1%
-radius = 12.0
+radius = 4.0
 fixed-center = true
 bottom = true
 
@@ -49,7 +49,7 @@ module-margin-right = 2
 
 ; I’m a weeb who also listens to weeb music, so I needed a font with Kanji
 font-0 = "Noto Sans CJK JP Regular:size=11;1"
-font-1 = "Noto Sans CJK JP Regular:size=11;1"
+font-1 = "Wuncon Siji:size=11;1"
 font-2 = "Noto Sans CJK JP Regular:size=11;1"
 
 modules-left = i3 mpd 
@@ -76,7 +76,7 @@ cursor-scroll = ns-normal
 [bar/left]
 monitor = ${env:MONITOR:DVI-D-0}
 width = 100%
-height = 27
+height = 22
 ;offset-x = 1%
 ;offset-y = 1%
 radius = 6.0
@@ -124,12 +124,12 @@ cursor-scroll = ns-normal
 [bar/main]
 monitor = ${env:MONITOR:DP-0}
 width = 100%
-height = 27
+height = 28
 ;offset-x = 1%
 ;offset-y = 1%
-radius = 6.0
+radius = 2.0
 fixed-center = true
-bottom = true
+bottom = false
 
 background = ${colors.background}
 foreground = ${colors.foreground}
@@ -236,23 +236,23 @@ label-mode-foreground = #000
 label-mode-background = ${colors.primary}
 
 ; focused = Active workspace on focused monitor
-label-focused = %index%
+label-focused = %name%
 label-focused-background = ${module/bspwm.label-focused-background}
 label-focused-underline = ${module/bspwm.label-focused-underline}
 label-focused-padding = ${module/bspwm.label-focused-padding}
 
 ; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
+label-unfocused = %name%
 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
 
 ; visible = Active workspace on unfocused monitor
-label-visible = %index%
+label-visible = %name%
 label-visible-background = ${self.label-focused-background}
 label-visible-underline = ${self.label-focused-underline}
 label-visible-padding = ${self.label-focused-padding}
 
 ; urgent = Workspace with urgency hint set
-label-urgent = %index%
+label-urgent = %name%
 label-urgent-background = ${module/bspwm.label-urgent-background}
 label-urgent-padding = ${module/bspwm.label-urgent-padding}
 

.config/ranger/rifle.conf

@@ -81,9 +81,9 @@ ext x?html?, has w3m,             terminal = w3m "$@"
 # Misc
 #-------------------------------------------
 # Define the "editor" for text files as first action
-mime ^text,  label editor = $EDITOR -- "$@"
+mime ^text,  label editor =  $EDITOR -- "$@"
 mime ^text,  label pager  = "$PAGER" -- "$@"
-!mime ^text, label editor, ext xml|csv|tex|py|pl|rb|js|sh|php = $EDITOR -- "$@"
+!mime ^text, label editor, ext xml|csv|tex|py|pl|rb|js|sh|php|rs|json|go|nim = $EDITOR -- "$@"
 !mime ^text, label pager,  ext xml|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
 
 ext 1                         = man "$1"

.config/zsh/aliases.sh

@@ -4,13 +4,15 @@ alias qaac_release=/mnt/hephaestos/qaac/qaac91
 alias define='python /home/kageru/programming/mwebster/mwebster.py'
 alias nanaone-stream='mpv rtmp://live1.brb.re/live/nanaone'
 alias ls='exa'
+alias up='sudo pacman -Syu'
+alias in='sudo pacman -S'
 alias feg=feh # don’t ask
 alias exat='exa --tree -L 3'
 alias animesync='python /home/kageru/programming/animesync-personal/animesync.py'
 #alias autoremove='sudo pacman -R $(pacaur -Qdtq)'
 export EDITOR=/usr/bin/vim
 #alias nt='alacritty --working-directory $PWD &'
-alias nt='urxvt -cd $PWD &'
+alias nt='urxvtc -cd $PWD &'
 alias ej='udisksctl power-off -b'
 alias monitor_on='pactl load-module module-loopback'
 alias monitor_off='pactl unload-module module-loopback'
@@ -23,7 +25,7 @@ alias la='ls -a'
 alias grep="grep --colour"
 alias clip='xsel -b'
 alias bitrateviewer='wine "/home/kageru/.wine/drive_c/Program Files (x86)/BitrateViewer/BitrateViewer.exe"'
-alias colorpicker="maim -st 0 | convert - -resize 1x1\! -format '%[pixel:p{0,0}]' info:-"
+alias colorpicker="maim -sot 0 | convert - -resize 1x1\! -format '%[pixel:p{0,0}]' info:-"
 alias fixgit='eval "$(ssh-agent -s)"; ssh-add ~/.ssh/git'
 alias sv='systemctl'
 alias xo='xdg-open'
@@ -31,6 +33,10 @@ alias resetgamma='xrandr --output DVI-D-0 --gamma 1:1:1 --output HDMI-1 --gamma
 alias texbuild='pdflatex -interaction=nonstopmode'
 alias weather='curl wttr.in/karlsruhe -s | head -n 7 -'
 alias weathertoday='curl wttr.in/karlsruhe -s | head -n 17 -'
+alias playdir='for f in ./*; do; mpv $f; done;'
+alias mntusb='sudo mount /dev/sdi1 ~/usb'
+alias mntphone='simple-mtpfs --device 1 ~/usb'
+alias umubs='sudo umount ~/usb'
 
 alias config='/usr/bin/git --git-dir=/home/kageru/dotfiles/ --work-tree=/home/kageru'
 alias -g ...='../../'           #cd ...

.i3/config

@@ -4,6 +4,7 @@
 # Set mod key (Mod1=<Alt>, Mod4=<Super>)
 set $mod Mod4
 
+exec ~/bin/autostart
 
 # custom
 
@@ -29,14 +30,21 @@ floating_maximum_size 1280 x 720
 bindsym XF86AudioPlay exec mpc toggle
 bindsym XF86AudioNext exec mpc next
 
+# These are the keycodes for F13 and F14 respectively. The corsair volume controller doesn’t seem to be recognized natively, so I rebounnd the volume wheel to those keys. And yes, xinput supports F-keys from 1-24
+bind 191 exec amixer -D pulse sset Master 5%+; exec --no-startup-id notify-send "`amixer -c 1 -M -D pulse get Master| grep -o -E '[[:digit:]]+%' | uniq`" -t 300
+bind 192 exec amixer -D pulse sset Master 5%-; exec --no-startup-id notify-send "`amixer -c 1 -M -D pulse get Master| grep -o -E '[[:digit:]]+%' | uniq`" -t 300
+
 bindsym --whole-window button10 exec mpc toggle
 bindsym --whole-window button11 exec mpc next
 bindsym XF86MonBrightnessUp exec xbacklight -inc 10; exec notify-send $(xbacklight -get) -t 300
 bindsym XF86MonBrightnessDown exec xbacklight -dec 10; exec notify-send $(xbacklight -get) -t 300
 
 # most certainly not the best way, but works on my machine™
-bindsym XF86AudioRaiseVolume exec pactl set-sink-volume alsa_output.pci-0000_00_1b.0.analog-stereo +2%; exec notify-send $(pactl list sinks | grep '^\s*Volume' | grep -Po '\d+%' | uniq) -t 300
+bindsym $mod+z exec --no-startup-id notify-send "`amixer -c 1 -M -D pulse get Master| grep -o -E '[[:digit:]]+%' | uniq`"
-bindsym XF86AudioLowerVolume exec pactl set-sink-volume alsa_output.pci-0000_00_1b.0.analog-stereo -2%; exec notify-send $(pactl list sinks | grep '^\s*Volume' | grep -Po '\d+%' | uniq) -t 300
+bindsym XF86AudioRaiseVolume exec amixer -D pulse sset Master 5%+; exec --no-startup-id notify-send "`amixer -c 1 -M -D pulse get Master| grep -o -E '[[:digit:]]+%' | uniq`" -t 300
+bindsym XF86AudioLowerVolume exec amixer -D pulse sset Master 5%-; exec --no-startup-id notify-send "`amixer -c 1 -M -D pulse get Master| grep -o -E '[[:digit:]]+%' | uniq`" -t 300
+#bindsym XF86AudioRaiseVolume exec pactl set-sink-volume alsa_output.pci-0000_00_1b.0.analog-stereo +2%; exec notify-send $(amixer -c 1 -M -D pulse get Master | grep -o -E '[[:digit:]]+%' | uniq)
+#bindsym XF86AudioLowerVolume exec pactl set-sink-volume alsa_output.pci-0000_00_1b.0.analog-stereo -2%; exec notify-send $(pactl list sinks | grep '^\s*Volume' | grep -Po '\d+%' | uniq) -t 300
 
 # set default desktop layout (default is tiling)
 # workspace_layout tabbed <stacking|tabbed>
@@ -72,9 +80,6 @@ bindsym $mod+Shift+q kill
 # start program launcher
 bindsym $mod+d exec --no-startup-id rofi -show run
 
-# launch categorized menu
-bindsym $mod+z exec --no-startup-id morc_menu
-
 ################################################################################################
 ## sound-section - DO NOT EDIT if you wish to automatically upgrade Alsa -> Pulseaudio later! ##
 ################################################################################################
@@ -91,9 +96,9 @@ bindsym $mod+Ctrl+m exec pavucontrol
 bindsym $mod+Ctrl+b exec terminal -e 'bmenu'
 bindsym $mod+F2 exec chromium
 #bindsym $mod+F3 exec cool-retro-term -e ranger
-bindsym $mod+F3 exec urxvt -e ranger
+bindsym $mod+F3 exec urxvtc -e ranger
 bindsym $mod+Shift+F3 exec gksu pcmanfm
-bindsym $mod+F5 exec urxvt -e 'ncmpcpp'
+bindsym $mod+F5 exec urxvtc -e 'ncmpcpp'
 bindsym $mod+t exec --no-startup-id pkill compton
 bindsym $mod+Ctrl+t exec --no-startup-id compton -b
 bindsym $mod+Shift+d --release exec "killall dunst; exec notify-send 'restart dunst'"
@@ -174,24 +179,24 @@ bindsym $mod+Ctrl+Left workspace prev
 # to display names or symbols instead of plain workspace numbers you can use
 # something like: set $ws1 1:mail
 #                 set $ws2 2:
-set $ws1 1
+set $ws1 一
-set $ws2 2:2-main
+set $ws2 二
-set $ws3 3:3-social
+set $ws3 三
-set $ws4 4
+set $ws4 四
-set $ws5 5
+set $ws5 五
-set $ws6 6
+set $ws6 六
-set $ws7 7
+set $ws7 七
-set $ws8 8
+set $ws8 八
 
-set $ws11 11
+set $ws11 十一
-set $ws12 12
+set $ws12 十二
-set $ws13 13
+set $ws13 十三
-set $ws14 14
+set $ws14 十四
-set $ws15 15
+set $ws15 十五
-set $ws16 16
+set $ws16 十六
-set $ws17 17
+set $ws17 十七
-set $ws18 18
+set $ws18 十八
-set $ws19 19
+set $ws19 十九
 
 
 # default screens
@@ -200,8 +205,8 @@ workspace $ws1 output DVI-D-0
 workspace $ws11 output DVI-D-0
 workspace $ws2 output DP-0
 workspace $ws12 output DP-0
-workspace $ws3 output HDMI-1
+workspace $ws3 output DVI-D-0
-workspace $ws13 output HDMI-1
+workspace $ws13 output DVI-D-0
 workspace $ws4 output DVI-D-0
 workspace $ws18 output HDMI-0
 workspace $ws19 output HDMI-0
@@ -267,8 +272,6 @@ bindsym $mod+Shift+KP_7 move container to workspace $ws17; workspace $ws17
 bindsym $mod+Shift+KP_8 move container to workspace $ws18; workspace $ws18
 bindsym $mod+Shift+KP_9 move container to workspace $ws19; workspace $ws19
 
-# Autostart
-exec ~/bin/autostart
 exec --no-startup-id i3-msg 'workspace $ws4; layout stacking; exec keepassxc; exec thunderbird; exec hexchat'
 exec_always ~/bin/restart_polybar
 
@@ -283,6 +286,7 @@ for_window [class="Pavucontrol"] floating enable
 for_window [class="(?i)virtualbox"] floating enable border normal
 for_window [class="mpv"] floating enable
 for_window [class="feh"] floating enable
+for_window [workspace=$ws12] floating enable
 
 
 # switch to workspace with urgent window automatically
@@ -295,17 +299,17 @@ bindsym $mod+Shift+c reload
 bindsym $mod+Shift+r restart
 
 # exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+bindsym $mod+Shift+e exec i3-msg exit
 
 # Set shut down, restart and locking features
 bindsym $mod+0 mode "$mode_system"
 set $mode_system (l)ock, (e)xit, switch_(u)ser, (s)uspend, (h)ibernate, (r)eboot, (Shift+s)hutdown
 mode "$mode_system" {
-    bindsym l exec --no-startup-id i3lock -i ~/Pictures/bg.png -ut, mode "default"
+    bindsym l exec --no-startup-id i3lock -i ~/Pictures/bg.png -t, mode "default"
-    bindsym s exec --no-startup-id systemctl suspend, mode "default"
+    bindsym s exec --no-startup-id systemctl suspend -i, mode "default"
     bindsym u exec --no-startup-id i3exit switch_user, mode "default"
     bindsym e exec --no-startup-id i3exit logout, mode "default"
-    bindsym h exec --no-startup-id systemctl hibernate, mode "default"
+    bindsym h exec --no-startup-id systemctl hibernate -i, mode "default"
     bindsym r exec --no-startup-id i3exit reboot, mode "default"
     bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"
 
@@ -446,7 +450,7 @@ set $i3_color15 #b48ead
 #    }
 #}
 
-bindsym $mod+m exec "mpv --player-operation-mode=pseudo-gui -- \\"`xsel -ob`\\""
+bindsym $mod+m exec "mpv --force-window=immediate --player-operation-mode=pseudo-gui --profile=encode -- \\"`xsel -ob`\\""
 
 # Theme colors
 # class                 border      backgr.     text        indic.      child_border
@@ -464,7 +468,7 @@ client.background       $i3_background
 
 # Set inner/outer gaps
 gaps inner 10
-gaps outer 6
+gaps outer 0
 
 # Additionally, you can issue commands with the following syntax. This is useful to bind keys to changing the gap size.
 # gaps inner|outer current|all set|plus|minus <px>

.vimrc

@@ -1,5 +1,5 @@
 set nocompatible              " be iMproved, required
-filetype off                  " required
+filetype on                  " required
 
 " set the runtime path to include Vundle and initialize
 set rtp+=~/.vim/bundle/Vundle.vim
@@ -13,6 +13,7 @@ Plugin 'VundleVim/Vundle.vim'
 Plugin 'zah/nim.vim'
 Plugin 'scrooloose/syntastic'
 Plugin 'w0ng/vim-hybrid'
+Plugin 'rust-lang/rust.vim'
 
 call vundle#end()            " required
 filetype plugin indent on
@@ -33,6 +34,7 @@ set shiftwidth=4
 set smartindent
 set smarttab
 set softtabstop=4
+set relativenumber
  
 " set beam cursor in insert mode
 let &t_SI = "\<esc>[5 q"
@@ -59,15 +61,3 @@ let g:syntastic_auto_loc_list = 1
 let g:syntastic_check_on_open = 1
 let g:syntastic_check_on_wq = 0
 
-" nim plugins
-fun! JumpToDef()
-  if exists("*GotoDefinition_" . &filetype)
-    call GotoDefinition_{&filetype}()
-  else
-    exe "norm! \<C-]>"
-  endif
-endf
-
-" Jump to tag
-nn <M-g> :call JumpToDef()<cr>
-ino <M-g> <esc>:call JumpToDef()<cr>i

.zshrc

@@ -43,10 +43,11 @@ setopt complete_in_word
 
 if [ ! -S ~/.ssh/ssh_auth_sock ]; then
   eval `ssh-agent`
+  ssh-add -l > /dev/null || ssh-add
   ln -sf "$SSH_AUTH_SOCK" ~/.ssh/ssh_auth_sock
 fi
+
 export SSH_AUTH_SOCK=~/.ssh/ssh_auth_sock
-ssh-add -l > /dev/null || ssh-add
 ssh-add ~/.ssh/git
 clear
 

bin/autostart

@@ -3,14 +3,14 @@
 rm -rf /home/kageru/temp/*
 cp ~/webpw.kdbx /mnt/gaia/
 fcitx
-syncthing &
+#syncthing &
 # xsetwacom --set 12 Area -14900 0 44400 16000
 # xrandr --fb 15360x2161 --dpi 192x192 --output DVI-D-0 --scale 2x2.0008 --pos 0x0 --panning 3840x2161+0+0 --output DP-0 --scale 2x2.0008 --panning 3840x2161+3840+0 --rate 144 --output HDMI-1 --panning 3840x2160+7680+0 --output HDMI-0 --scale 2x2.0008 --panning 3840x2161+11520+0
-xrandr --fb 7680x2160 --output DVI-D-0 --pos 0x0 --output DP-0 --mode 1920x1080 --rate 144 --right-of DVI-D-0 --output HDMI-1 --right-of DP-0 --output HDMI-0 --below DVI-D-0
+xrandr --fb 8320x2160 --output DVI-D-0 --pos 0x0 --mode 1920x1080 --rate 144 --output DP-0 --mode 2560x1440 --rate 144 --right-of DVI-D-0 --output HDMI-0 --right-of DP-0 --dpi 109x109
 ~/bin/fixkeyboard
 ~/.fehbg
+xrdb ~/.Xresources
 mpd
-redshift -t 6500:3200 -l 49:8.4 &
+redshift -t 6500:3200 -l 53.55:9.64 &
-#pactl unload-module module-role-cork
+pactl unload-module module-role-cork
-