# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l
# Your preferred terminal emulator
set $term alacritty
# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
#set $menu dmenu_path | wofi --dmenu | xargs swaymsg exec --
set $menu dmenu_run

bindsym XF86AudioPlay exec mpc toggle
bindsym XF86AudioNext exec mpc next
bindsym $mod+F7 exec mpc next

### Output configuration
#
# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
output * bg /home/kageru/Pictures/bg.png fill
#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs

output HDMI-A-1 mode 2560x1440@144Hz
output HDMI-A-1 position 2560 0
output DP-1 mode 2560x1440@240Hz
output DP-1 position 0 0

default_border pixel 1
default_floating_border pixel 3
bindsym $mod+u border none
bindsym $mod+y border pixel 1

### Idle configuration
#
# Example configuration:
#
# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
#          before-sleep 'swaylock -f -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
#   input "2:14:SynPS/2_Synaptics_TouchPad" {
#       dwt enabled
#       tap enabled
#       natural_scroll enabled
#       middle_emulation enabled
#   }

input "type:keyboard" {
    repeat_delay 250
    repeat_rate 40
    xkb_layout "de"
    xkb_variant "neo_qwertz"
}
input "type:pointer" {
    pointer_accel 0
    accel_profile flat
}
input "type:touchpad" {
    pointer_accel 0
    accel_profile flat
}
input "type:mouse" {
    pointer_accel 0
    accel_profile flat
}
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

for_window [app_id="mpv"] floating enable
for_window [class="feh"] floating enable
for_window [class="sxiv"] floating enable
for_window [app_id="Alacritty"] opacity 0.9
no_focus [class="jetbrains-.*"]
no_focus [class=".*discord.*"]
for_window [urgent=latest] none

### Key bindings
#
# Basics:
#
# Start a terminal
bindsym $mod+Return exec $term

# Kill focused window
bindsym $mod+q kill

# Start your launcher
bindsym $mod+d exec $menu
bindsym Ctrl+Shift+4 exec /home/kageru/bin/pyshare
bindsym Ctrl+Shift+8 exec /home/kageru/bin/pyshare -e 1
bindsym $mod+Shift+u exec /home/kageru/bin/pyshare -m text
bindsym $mod+x exec rofi -show window

bindsym $mod+Shift+d exec discord
bindsym $mod+F2 exec qutebrowser
bindsym $mod+F3 exec alacritty -e ranger
bindsym $mod+F5 exec alacritty -e ncmpcpp
bindsym $mod+m exec mpv --force-window=immediate --gpu-context=wayland --player-operation-mode=pseudo-gui --profile=db -- "`wl-paste`"

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1; workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2; workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3; workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4; workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5; workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6; workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7; workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8; workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9; workspace number 9
    bindsym $mod+Shift+0 move container to workspace number 10; workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+g splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

workspace_auto_back_and_forth yes
bindsym $mod+b workspace back_and_forth
bindsym $mod+Shift+b move container to workspace back_and_forth; workspace back_and_forth

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
# bar {
# position top

    # When the status_command prints a new line to stdout, swaybar updates.
    # The default just shows the current date and time.
# status_command while date +'%Y-%m-%d %R:%S'; do sleep 1; done

# colors {
# statusline #ffffff
# background #323232
# inactive_workspace #32323200 #32323200 #5c5c5c
# }
# }

include /etc/sway/config.d/*
exec /home/kageru/bin/autostart_sway